List of supported cars
Below you will find a list of cars supported in the application.
Supported interfaces
The OPL Monitor application for reading information from the car uses an ELM327 or compatible interface
Below is a list of devices that have been tested by our team and application users.
Vgate vLinker
MS
Bluetooth
Android
Allow unlock DIC options
Reading DTC fault codes from most car modules.
Recommend - this interface has been tested by our team
Vgate vLinker
MC / MC+
Bluetooth / BLE / WiFi
iOS and Android
Allow unlock DIC options
Reading DTC fault codes from most car modules.
iPhone and iPad require the MC+ or MC WiFi version
Recommend - this interface has been tested by our team
Vgate iCar Pro
Bluetooth / BLE / WiFi
iOS oraz Android
Reading DTC fault codes from the most important modules of the car
iPhone and iPad require BT 4.0 (BLE) or WiFi version.
Recommend - this interface has been tested by our team
Vgate iCar2
Bluetooth / WiFi
iOS and Android
Reading DTC fault codes from the most important modules of the car
iPhone and iPad require BT 4.0 (BLE) or WiFi version.
Recommend - this interface has been tested by our team
Vgate iCar3
Bluetooth / BLE / WiFi
Reading DTC fault codes from the most important modules of the car
iPhone and iPad require BT 4.0 (BLE) or WiFi version.
Recommend - this interface has been tested by our team
KONNWEI KW902
Bluetooth / BLE / WiFi
Reading DTC fault codes from the most important modules of the car
iPhone and iPad require BT 4.0 (BLE) or WiFi version.
Recommend - this interface has been tested by our team
KONNWEI KW903
Bluetooth / BLE / WiFi
Reading DTC fault codes from the most important modules of the car
iPhone and iPad require BT 4.0 (BLE) or WiFi version.
OBDLink
MX / MX+
Bluetooth
Android only
Reading DTC fault codes from the most important modules of the car
Othr ELM327 interfaces
Bluetooth / WiFi
Not recommend
We are not able to clearly state whether they will work properly with the OPL Monitor application.
If you decide to use a other device than listed before, beware of low-quality devices mainly from China. These interfaces usually doesn't have the full implementation of the ELM327 specification and may not be compatible with the application.
Extra functions
The application allows you to run special functions.
(The availability depends on the car model and equipment)
Infotainment and Multimedia Options
Enable or disable additional multimedia system options.
Applies to cars equipped with IntelliLink Navi900 (IO6) and Touch RF700 (IO5) multimedia systems based on HMI 2.5 module.
Available options:
-
Rear View Camera
To activate the reversing camera in cars where it was not factory installed.
The original camera or a replacement operating in the NTSC system should be installed.
-
Video In Motion
Play videos while driving and enable some DIVX format.
Supported movie resolution: 480х320, 480х368, 712х400, 720х400, 1280х720, 1920х1088
Suportet file format: .mp4, m4v, .wmv, .mpg.
Supported Video Codec: MPEG-4 (H.264)
Supported Video Codec: MPEG-4 AAC
Please note that watching movies while driving may be dangerous for the driver. Movies should be watched only by passengers.
-
Touchpad-a Activation
Activates an additional Touchpad in cars where it was not factory-installed.
-
Themes
Changing the color variant of the display. Available options: Opel, Vauxhall, Buick, Chevrolet, Cadillac, GMC
Note: If a different graphic theme is set, some graphic elements could not be displayed correctly, e.g. some icons may not be displayed.
-
Main Logo & Animations
Changing the start logo and animation to one of the variants: Opel, Vauxhall, Buick, Chevrolet, Corvette, GMC, Cadilac
-
More Interface Language unlock
Unlocking additional interface languages. Usefull after importing a car from the USA to EU
This function works only with vLinker MC or OBDLink MX+ OBD interface.
Important: : vLiker software must be version 2.2.76 or later. Instructions for update is here
This feature requires an additional fee. Details in the app.
Dashboard Options
This function allows you to expand the options in the Instrument Cluster Panel.
Works for the Dashboard:
- Uplevel UHS - 8" colour graphic Read More
- Midlevel UDD - 4.2" colour graphic Read More
- Uplevel UDC Combo - monochromatic Read More
- Uplevel UDC - monochromatic Read More
- UDB - LCD Read More
This function works only with vLinker MC or OBDLink MX+ OBD interface.
This feature requires an additional fee. Details in the app.
Reverse Camera Activation
This function works for the Radio / Navigation:
- Navi600 (RPO Code: UCU)
- Navi900 (RPO Code: UCW)
For:
- Opel/Vauxhall Insignia A (2012-2013 ) Sedan / Hatchback / Sports Tourer
- Opel/Vauxhall Astra J GTC / Sedan / Hatchback / Sports Tourer
- Opel/Vauxhall Zafira C
- Chevrolet Orlando
- Chevrolet Cruze
This function works only with vLinker MC or OBDLink MX+ OBD interface.
This feature requires an additional fee. Details in the app.
Infotainment Unlock
Function will remove Theft protection in the Infortaiment system after replacing the Radio module, Human-Machine Interface module (HMI), CD Player or Audio Amplifier.
This function works for the Infortaiment with IO5 or IO6 RPO Code
For:
- Opel/Vauxhall Insignia A (2014-2017)
- Opel/Vauxhall Insignia B (2018)
- pel/Vauxhall Astra K (2016-2020)
- Opel/Vauxhall Mokka X (2017-2019)
- Opel/Vauxhall Crossland X (2017-2021)
- Buick cars
- Cadilac cars
- Chevrolet cars
- GMC cars
This function works only with vLinker MC or OBDLink MX+ OBD interface.
This feature requires an additional fee. Details in the app.
Radio Unlock
Function will remove Theft protection in the Radio / Navigation after the replacement
You can us this function for:
- CD500 (RPO Code: UXU)
- DVD800 (RPO Code: UXX)
- Navi600 (RPO Code: UCU)
- Navi900 (RPO Code: UCW)
This function works only with vLinker MC or OBDLink MX+ OBD interface.
This feature requires an additional fee. Details in the app.
Vehicle access
Emergency unlocking the locked doors.
Opcja do wyboru:
- Driver Door Unlock
- Opel All doors
- Door DeadLock Unlock
Windows
This function allows you to control the car's windows from the application.
You can chose:
- Open / Close Driver Window
- Open / Close Passanger Window
- Open / Close Rear Right Window
- Open / Close Rear Left Window
- Open / Close All Windows
Engine Oil Life Reset
For set the engine oil life value.
You can chose:
- 100%
- 75%
- 50%
- 25%
- 0%
Privacy Policy
Below are the principles that guide us in processing the collected information.
OPL Team develop the OPL Monitor application, hereinafter referred to as the Application.
The application is intended to be used as is.
This page is used to inform users of the application about my policy regarding the collection, use and disclosure of personal data.
If you choose to use the app, you consent to the collection and use of information in connection with this policy.
The Data we collect is used to provide and improve the app. We will not use or share your information with anyone except as described in this Privacy Policy.
Collection and use of data
Your privacy is important to us, therefore we do not collect data that can be used to directly identify you, however, to ensure the proper operation of the application, we may collect information such as:
- Brand, model, version of the operating system, screen resolution of the device on which the applications are installed,
- Manufacturer name, model name, MAC address, IP address of the device (interface) used to connect to the vehicle,
- VIN and other information read by the application from your vehicle.
Above data is collected via third party products to ensure the identification of your vehicle variant (VIN decoding), and in the event of a failure to improve the quality of the application. These data may also be used by me for statistical purposes.
The data collected by me via the application will not be transferred to other entities for marketing purposes and will not be used for profiling purposes, unless you give separate consent to it.
Third party
In order to improve the quality of the application, we reserve the right to engage third parties.
We want to inform you that third parties involved in improving the quality of the application may access the collected information. The reason is to perform the tasks entrusted to them, however, they are obliged not to disclose or use the information obtained for any other purpose.
Third-party Services
The application uses third party services that may collect information to identify the user.
Third-party Services Privacy Policy:
Security
We try to use commercially acceptable means of securing the collected information.
Remember, however, that no method of transmission over the Internet or method of electronic data storage is 100% secure, therefore we cannot guarantee its complete security.
Links to other sites
The application may contain links to other websites. If you click on a third party link, you will be directed to that site. Please note that these external sites are not operated by me. Therefore, we strongly advise you to read the Privacy Policy of these websites. We have no control over and am not responsible for the content, privacy policies, or practices of any third party sites or services.
Children's privacy
We do not knowingly collect personal information from children under the age of 13. In the event that we find that a child under the age of 13 has provided me with personal data, we delete it from our servers immediately. If you are a parent or guardian and you are aware that your child has provided us with personal information, please contact us at support@oplmonitor.eu so that we can take the necessary steps.
Changes to this Privacy Policy
We reserve the right to make changes to this Privacy Policy. Therefore, it is recommended that you review this page periodically for any changes. We will notify you of any changes by posting the new Privacy Policy on this page. Changes to the Privacy Policy come into force immediately after they are published on this page.
Contact
If you have any questions or suggestions regarding this Privacy Policy, please do not hesitate to contact us.